PRIDE FUEL PICKUP KIT
PRIDE FUEL PICKUP KIT
PRIDE FUEL PICKUP KIT
PRIDE FUEL PICKUP KIT
PRIDE FUEL PICKUP KIT
  • Load image into Gallery viewer, PRIDE FUEL PICKUP KIT
  • Load image into Gallery viewer, PRIDE FUEL PICKUP KIT
  • Load image into Gallery viewer, PRIDE FUEL PICKUP KIT
  • Load image into Gallery viewer, PRIDE FUEL PICKUP KIT
  • Load image into Gallery viewer, PRIDE FUEL PICKUP KIT

PRIDE FUEL PICKUP KIT

Vendor
PRIDEAUTOLLC
Regular price
$75.00
Sale price
$75.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

 

This fuel pick up kit is ideal for stock and modified cars. Ever notice your car is hard to start after being parked on an incline?,  when you push to start, it cranks noticeably longer. Notice your modified car is starving for fuel during aggressive launches?, I did in my daily driver & decided to do something about it!. I wanted a cost effective simple solution to my problem & once it addressed my issues, I offered it to a highly trusted contact, that shared positive feedback, stating the starvation was gone in multiple highly modified vehicles. This kit has been on multiple modified vr30's for yrs, with sub 11 second 1/4 miles, & sub 1.8 60' indicating massive g forces. This kit will eliminate fuel pump starvation when the vehicle is on a steep incline and during hard launches.

Pros:

Increase fuel pump life

Eliminate fuel pump starvation

Run lower fuel levels. less fuel equates to less weight. less weight = lower 1/4 mile et's

Im not responsible for FUEL EXHAUSTION by "that 1 guy trying to run his car on empty! please have fuel in your tank.lol

This kit will not solve the underlying condition you have. If you're fuel cutting because of damage to a line / o-ring, bad injectors, lpfp, high duty cycle from your pumps / injectors because of high ethanol content, wrong fuel sock or position.

Cons: 

Zilch, Nada, None!

 

Installation is straight forward but I recommend a auto tech install it.

Best to wait until you are @ or under a 1/4 tank.

Remove the rear lower seat cushion

Jack up the driver side.

Place driver side of vehicle on jack stands.

Remove the driver side fuel tank access cover

Remove sending unit

Make sure the metal line is not submerged.

Place the fuel sock in front of the metal baffle.

Slide the sock and magnet to the left rear of the tank.

Attach corrugated hose end to the metal line (with zip tie or worm clamp)

Make sure the hose is not kinked or bent (pictures below for reference)

Install sending unit, access cover. lower the vehicle off the stands. start the car, install the seat cushion, & enjoy.

If you are reading this far, id like to thank you for your intrest and or purchase of another product from a car enthusiast owned business

 

Fuel starvation: The fuel system failing to supply sufficient fuel to allow the engine to run properly...